Programmable Laboratory Battery Electronics Testing Equipment Climate Chamber Temperature And Humidity Test Chamber
Temperature humidity test chamber is use to test material heat,cold,dry resistance, humidity resistance.Suitable for electronics, electrical appliances, communications, instrumentation, vehicles, plastic products, metal, food, chemical, building materials, medical, aerospace and other products.
| Model | BT-150 | BT-225 | BT-408 | BT-800 | BT-1000 |
| Inner size
WHD (cm) | 50*60*50 | 60*75*50 | 80*85*60 | 100*100*80 | 100*100*100 |
| External size
WHD (cm) | 70*162.5*153 | 80*177.5*153 | 100*192.5*163 | 120*209*183 | 120*209*203 |
| Window Size
WH (mm) | 500*600 | 600*750 | 800*850 | 100*100 | 100*100 |
| Test Hole Size
Diameter (mm) | 2 holes
50mm of each | 2 holes
100mm of each | 2 holes
100mm of each | 2 holes
100mm of each | |
| Weight | 320KG | 370KG | 460KG | 560KG | 590KG |
| Voltage | 1Ø 220V 50Hz/ 3Ø 380V 60Hz/Customized |
| Temperature range | -70℃ ～180℃ |
| Humidity range | 10% ～98%RH
(5%~98% R.H. customized) |
| Temp.& humidity control fluctuation | ≤±0.5℃, ≤ ±2.5%RH |
| Indication resolution | 0.01℃, 0.1 %RH |
| Temp.&humidity Uniformity | ≤±1.5℃,≤±2.5% RH |
| Heat up&Cool down time | ≤5℃/min for heating; ≤ 1.2℃/min for cooling |
| Cooling type | Air cold |
| Chamber materials | SUS#304 stainless steel for Inner chamber with thickness 1.5mm
Steel plate for external chamber with thickness 1.5mm |
| Insulation
materials | Rigid polyurethane foam + ultrafine glass fiber with thickness of 100mm |
| | Refrigerating unit, water supply and drainage device, blower fan, power distributing Cabinet;
Humidifying and humidity measuring water utilization control device |
| | Heat emission blower fan
Distribution switchboard
Test terminal of sample
USB physical interface (need to be purchased together with centralized monitoring software)
Residual current circuit breaker of main power supply |
| | Basin heating humidifying method
Stainless steel armored heater is adopted in basin humidification
Control mode of heater: non contact equal period pulse-width modulation, SSR (solid state
relay)
Water level control device, dry heating prevention device of heater |
| Humidifier | 1.Basin heating humidifying method
2.Control mode of heater: non contact equal period pulse-width modulation, SSR (solid state relay)
3.Water level control device, dry heating prevention device of heater |
| | Temperature (humidity) control display, over temperature protection setting device,emergency switch, run indicator, failure
indicator |
| | Imported Compressor
Fits wide range of pressure
Higher heating efficiency
Easy to maintain |
| | 1.Unique design of the box within the wind circulation structure, to ensure that under the conditions of the test with the case of uniformity within the box within ± 2 ℃ 2.Unique design of the humidity test when the top of the box anti-drip design to ensure that live test from water short circuit, surface water pollution 3.Using the latest environmentally friendly adsorption drying processor, effective control of the product when the surface temperature condensation 4.The refrigeration room is fully sealed and soundproofed to reduce machine noise and box resonance, machine noise control within 75db./Other Contact us |
| | Screen Size &Display | 7" TFT-LCD |
| Down load data | By USB directly |
| Language | ENG (other language can be acceptable) |
| Number of Program Groups | 120 Groups, each Group with 1200segments with 9999 cycles |
| Connected to PC | YES |
| Easy for Operation | YES |
Manufacturing Technique
Factory Inspection
We control quality from the materials, electronic parts, controller,comppressor, solenoid valve, and many parts of the products.
Certification
Cooperative partners
BOTO ADVANTAGE
Customers photos
Our Services
During the whole business process, we offer Consultative Selling service.
1) Customer inquiry process:
Discussing testing requirements and technical details, suggested suitable products to customer to confirm. Then quote most suitable price according to customer requirements.
2) Specifications customize process:
Drawing related drawings to confirm with customer for customized requirements. Offer reference photos to show the products appearance. Then, confirm the final solution and confirm final price with customer.
3) Production and delivery process:
We will produce the machines according to confirmed PO requirements. Offering photos to show production process.
After finish production, offer photos to customer to confirm again with the machine. Then do own factory calibration or third party calibration(as customer requirements). Check and test all the details and then arrange packing.
Deliver the products in confirmed shipping time and inform customer.
4) Installation and after sale service:
Defines installing those products in the field and providing after-sales support.
Packing&Shipping
Product Tags:
|
|
Programmable Laboratory Battery Electronics Testing Equipment Climate Chamber Temperature And Humidity Test Chamber Images
|
